Extreme Networks Alpine 3800 GM-16T3 Manual de usuario descargar pdf

The Alpine™ 3800

high-density Gigabit Ethernet

modules are 16-port modules powered

by Extreme’s innovative Triumph™ technology.

These high-density modules provide unparalleled

Gigabit Ethernet scalability, performance and

control. The GM-16T

is a 16-port 10/100/1000BASE-T

module targeting applications that require more than fast Ethernet speeds now,

and in the future (e.g. mission-critical workstations, high capacity servers and

copper uplinks in both the wiring closet and data center). The GM-16X

is a

16-port 1000BASE-X mini-GBIC module that meets and exceeds the higher

throughput requirements of gigabit uplinks from edge access distribution

switches and high-capacity optical servers. Both high-density Gigabit Ethernet

modules are focused on bringing the following critical network connectivity

enhancements to the Alpine 3800:

• Scalability of 400% more Gigabit Ethernet ports to support fast growing

high-capacity applications: The GM-16T

and GM-16X

support a 400%

increase in Gigabit Ethernet density allowing up to 128 ports in an Alpine

3808 to better support additional high capacity applications, Gigabit

Ethernet enabled servers, and end users demanding throughput far greater

than the fast Ethernet connections they currently have.

• Gigabit performance and throughput, when needed. Up to a full gigabit of

sustainable throughput per second is available on each and every GM-16T

and GM-16X

port. When high capacity applications need full Gigabit

Ethernet network access, it’s available and ready for use.

• Turn up the performance of your high capacity applications: High

throughput becomes high performance when you can control and manage

the Gigabit Ethernet trafﬁc at every port. These Triumph based modules

realize this ideal with T-Control. T-Control enables bi-directional, multi-

tiered trafﬁc shaping with industry-leading granularity, guaranteeing critical

applications are always transported through the network.

The 3rd generation Triumph-based GM-16T

and GM-16X

modules are

fully interoperable and compatible with Extremes 2nd generation “i” series

Alpine products. As a result, Triumph delivers the industry’s highest level of

investment protection for Extreme’s existing products and customers.

Scalability of 400% more Gigabit Ethernet ports to support

fast growing high-capacity applications

The GM-16T

and GM-16X

modules satisfy the increasing need for more

Gigabit Ethernet ports by supporting 400% more Gigabit Ethernet ports –

allowing for both gigabit performance and high-densities (up to 128 Copper

Gigabit Ethernet connections in an Alpine 3808 chassis).

High-capacity applications such as video, medical imaging and large ﬁle

transfers/backups are only the beginning. As more and more end user devices

are standardizing on embedded gigabit NICs and data centers are increasingly

provisioned with dense gigabit-enabled servers, the demand for high-capacity

switch ports is increasing at a rapid rate. The desire of IT managers to make

smart infrastructure purchase decisions to future-proof the network is also

behind the order of magnitude increase in demand for Gigabit Ethernet. The

GM-16T

and GM-16X

modules allow the network administrator to easily

and inexpensively increase bandwidth to both servers and end users without

sacriﬁcing density.

Gigabit performance and throughput, when needed

Servers and users expect more than just high Gigabit Ethernet port density;

they require and demand full Gigabit Ethernet capacity be available when they

need it. Every Gigabit Ethernet port in the Triumph based GM-16T

and

GM-16X

modules provides full gigabit-level connectivity to support the most

demanding high capacity applications, enabling high rates of throughput even

when all other ports on the module are being used.

Networks have periods of intense activity. It’s important for the next generation Gigabit

Ethernet switches to reliably forward at high rates of speed simultaneously on all interfaces.

Failing to provide adequate forwarding causes dropped trafﬁc and retransmissions, further

aggravating network congestion and lowering overall performance. Unlike competitors that

provide a gigabit link but only support sustained performance comparable to fast Ethernet, the

GM-16T

and GM-16X

modules provide the true gigabit performance one expects from a

gigabit connection with a sustained forwarding rate more than double the competition’s rate.

Make high-capacity application throughput a reality with T-Control

The GM-16T

module enables unprecedented control over network trafﬁc using T-Control,

a new technology transforming Gigabit Ethernet throughput into a true high

performance solution.

T-Control allows network administrators to determine how much bandwidth each port can

service and how much bi-directional bandwidth each individual application being transported

through the port will receive. T-Control guarantees network access to the most important

applications and conditional access for the remaining applications if capacity is present.

Enterprise networks beneﬁt from T-Control’s per-application trafﬁc classiﬁcation in that they

can ensure mission critical services, such as Voice-over-IP (VoIP), always receives the network

resources they require. T-Control guarantees that money spent on deploying enterprise wide

applications isn’t wasted because of congestion in the network. T-Control makes sure that all

users get fair access to the network but power-users can burst to gigabit rates if network

resources are present. T-Control makes the most of the network investment.

Advanced bandwidth control allows service providers to offer a whole new range of metro

Ethernet services to end-users such as tiered rate shaping services by allowing dynamically

settable rates from 1kbps to 1Gbps in 1kbps increments. With the GM-16T

and GM-16X

modules, metro service providers can now deploy robust revenue generating Gigabit Ethernet

services on a dense Gigabit Ethernet, NEBS compliant platform, increasing bandwidth while

decreasing capital expenditure.

Protecting the enterprise “last mile” with non-invasive cable testing

The most advanced Gigabit Ethernet port in the world is useless if the cable connecting it

to the end-station doesn’t work. Triumph provides the telecom manager the ability to

manage the network copper infrastructure down to the individual wire pair. This feature

provides savings in both time and money when the network is undergoing migration from fast

Ethernet to copper Gigabit Ethernet as well as when those unforeseen cable outages occur.

In modern networks, managing cable infrastructure is becoming more difﬁcult because not

only is the density of copper Gigabit Ethernet increasing but Gigabit Ethernet over copper

(IEEE 802.3ab) demands much more out of the cabling infrastructure than fast Ethernet did

(i.e. all 4 wire pairs are used instead of the 2 pairs used in Fast Ethernet). The GM-16T

(GM-16T

and GM-16X

)

Alpine 3800 High-Density Gigabit Ethernet Modules

For more product information from Extreme Networks, please call 1.888.257.3000. 3585 Monroe Street, Santa Clara, CA 95051-1450 Phone 408.579.2800

Fax 408.579.3000 Email [email protected] Web www.extremenetworks.com

module removes this burden by providing advanced 802.3ab cable diagnostic and fault

detection technology. This capability allows the network administrator to test copper cables

to identify and isolate faults in the cable to within 1 meter of any defect or abnormality,

without ever having to physically touch a cable. This feature provides:

• Open/short/crossed pair detection

• Improper termination detection

• Cable length detection through advanced per port Time Domain Reflectometry circuitry

Given that cabling is often one of the greatest challenges for any network deployment,

Triumph’s cabling system fault isolation technology promises to greatly improve network

uptime and manageability.

Alpine High-Density Gigabit Ethernet Turns Throughput

into Performance

The Triumph based GM-16T

and GM-16X

modules provide fast and reliable transport for

high-capacity applications. Gigabit Ethernet scalability enabled by a 400% increase in Gigabit

Ethernet port density, the performance necessary to provide the gigabit network access when

required, and the necessary control to individually guarantee the most important network

applications means that with these modules the network is used in the most optimum and

efficient manner possible. The GM-16T

and GM-16X

modules protect the network

investment now and in the future by both maintaining full inoperability with the existing

Alpine infrastructure and through high-performance Gigabit Ethernet interfaces that will

handle all future bandwidth requirements.

GM-16T

and GM-16X

Feature Summary

• Scales to 128 10/100/1000 copper or mini-GBIC Gigabit Ethernet connections in an

Alpine 3808, with 64 and 20 Gigabit Ethernet connections in a 3804 and 3802 respectively.

• Advanced T-Control traffic management providing bi-directional rate shaping

relevant for growing Enterprises and metro Ethernet providers.

• The GM-16T

module integrates physical cable testing functionality directly into the

switch port, which greatly simplifies troubleshooting and shortens cable based outages.

• Byte based traffic accounting based on ingress port, application, VLAN or traffic priority.

• Hardware-based IP/IPX routing using RIP v1/v2 OSPF, IS-IS, BGP4, PIM and DVMRP.

• Hardware-based Access Control Lists (ACLs) can be linked to a class of service, while

performing Layer 1-4 packet-level security and controlling traffic flows – all without

sacrificing forwarding performance.

• Backward compatible with existing Alpine products.

Number of ports per module:

GM-16T

: 16 ports of 10/100/1000BASE-T using RJ-45 physical interface

GM-16X

: 16 ports of 1000BASE-X using mini-GBIC (SFP) slots

Connectors:

GM-16T

: RJ-45

GM-16X

: LC for Optical SFPs

Port density per chassis:

Alpine 3808: 128 ports

Alpine 3804: 64 ports

Alpine 3802: 20 ports (one GM-16T

or GM-16X

with 4-port GM-4Ti/Xi)

Distance:

GM-16T

: 100meters

GM-16X

• SX SFP GBIC: 550 Meters over Multi-mode Fiber

• LX SFP GBIC: 10 Kilometers over Single-mode Fiber

• ZX SFP GBIC: 70 Kilometers over Single-mode Fiber

Physical Specifications

Occupies a single I/O slot on a Alpine 3800 series chassis.

Module dimensions (H x W x D): 1.5 x 16.25 x 8.0 in

(3.8 x 41.3 x 20.3 cm)

Module weight:

GM-16T

: 4.0lb (1.8 kg)

GM-16X

: 3.75lb (1.81kg)

• Shipping box dimensions (H x W x D): 4.25 x 20.0 x 11.25 in

(10.8 x 50.8 x 28.6 cm)

Meantime before failure:

GM-16X

: 401,666 hours

GM-16T

: 277,778 hours

Environmental Compliance & Conditions

Operating temperature: 0° to 40° C

Storage temperature: -40° to 70° C

Operating relative humidity: 10% to 95%, non-condensing

ETSI/EN 300 019-2-1: 2000 class 1.2 (Storage Environment)

ETSI/EN 300 019-2-2: 1999 class 2.3 (Transportation Environment)

ETSI/EN 300 019-2-2: 1999 class 3.1e (Operational Weather

Protected Environment)

ASTM D5276 (Drop - packaged)

ASTM D3580 (Random Vibration 1.5g min, operational)

ASTM D3332 (Shock 30g min, operational)

Safety Compliance

UL 60950 3rd Edition, Listed Accessory (North American Safety

of ITE)

cULus, Listed Accessory, Equivalent to CAN/CSA-C22.2 No. 60950-00

(Canadian Safety)

EN60950: 2000 with Deviations (European Safety of ITE)

IEC60950: 2000 CB Scheme with Deviations (International Safety

of ITE)

TUV-R GS Mark (German Notified Body)

Low Voltage Directive (LVD) (European Safety of ITE)

AS/NZX 3260 (Australia / New Zealand Safety Standard)

NOM/NYCE (Mexico Safety & EMC Approval)

S-Mark (Argentina Safety)

EMI/EMC Compliance

FCC 47 CFR Part 15 Class A (USA Emissions Standard)

ICES-003 Class A (Canada Emissions Standard)

89/336/EEC EMC Directive (European Directive)

EN 55022: 1998 Class A (European Emissions Standard)

EN 55024: 1998 includes IEC 61000-4-2, 3, 4, 5, 6, 8, 11

(European Immunity Standards)

CISPR 22: 1997 Class A (International Emissions Standard)

CISPR 24: 1998 (International Immunity Standard)

ETSI/EN 300 386: 2001 (EU Telecom Emissions &

Immunity Standard)

EN 61000-3-2,3 (European Harmonics & Flicker Standards)

CNS 13438: 1997 Class A (Taiwan BSMI Approval)

VCCI Class A (Japan EMC Standard)

AS/NZS 3548 (Australia/New Zealand EMC Standard)

MIC Approval (Korean EMC Approval)

NOM/NYCE (Mexico Product Safety & EMC Approval)

GOST (Russia)

Extreme Velocity, Extreme Turbodrive and the color purple are registered trademarks of Extreme Networks, Inc. in certain jurisdictions. Alpine, ExtremeWare Vista, Extreme Standby Router

Protocol, ESRP, Summit1i, Summit4, Summit4/FX, Summit5i, Summit24, Summit24e2, Summit24e3, Summit48, Summit48i, SummitLink, SummitGbX, SummitRPS, SummitPx1,

PxSilicon, EPICenter, vMAN, the BlackDiamond logo, the Alpine logo and the Extreme Networks logo are trademarks of Extreme Networks, Inc., which may be registered or pending

registration in certain jurisdictions. ExtremeWorks, the Extreme Turbodrive logo and the Go Purple-Extreme Solution Partner logo are service marks of Extreme Networks, Inc., which may be

registered or pending registration in certain jurisdictions. All other registered trademarks, trademarks and service marks are property of their respective owners. Specifications are subject

to change without notice. L-DS-GM16-305

Ordering Information

DescriptionPart Number

45121 GM-16X

- Alpine 3800 16-port 1000BASE-X Module with mini-GBIC (SFP) connections

45122 GM-16T

- Alpine 3800 16-port 10/100/1000BASE-T Module with RJ-45 connections

10051 Extreme Mini-GBIC, SFP, 1000BASE-SX, LC Connector, for use with multi-mode fiber with distances up to 550 meters

10053 Extreme Mini-GBIC, SFP, 1000BASE-ZX Extra long distance SMF 70 Km/21 dB budget, LC connector

10052 Extreme Mini-GBIC, SFP, 1000BASE-LX, LC Connector, for use with single mode fiber, distances up to 10 Km

oduct Specifications

1 2

and GM-16X 1

Indice de contenidos

Pagina 1 - and GM-16X

The Alpine™ 3800 high-density Gigabit Ethernet modules are 16-port modules powered by Extreme’s innovative Triumph™ technology. These high-density mod

Pagina 2

The Alpine™ 3800 high-density Gigabit Ethernet modules are 16-port modules powered by Extreme’s innovative Triumph™ technology. These high-density mod

Comentarios a estos manuales

Sin comentarios

Extreme Networks Alpine 3800 GM-16T3 Manual de usuario

Busca en linea o descarga Manual de usuario para Los conmutadores de red Extreme Networks Alpine 3800 GM-16T3. Alpine 3800 High-Density Gigabit Ethernet Modules Manual de usuario

Indice de contenidos

Comentarios a estos manuales

Relacionado con productos y manuales para Los conmutadores de red Extreme Networks Alpine 3800 GM-16T3