Extreme Networks Policy Manager Guía de usuario descargar pdf (Pagina 17)

Opening the EPM

Extreme Networks Policy Manager (EPM) 1.2 User Guide

2 After reading, Close the box. The following IP Address Notice is displayed. This notice is displayed

every time the EPM is opened until an IP address has been set.

3 Click OK. The EPM then notifies the user if it has found a TFTP server. Without one, the EPM can

open and save local policies only.

a If it finds a TFTP server, the following notice is displayed.

Refer to “Configuring the EPM for use on a Switch” on page 18 to set the policy staging directory.

b If it does not find a TFTP server, the following notice is displayed.

If necessary, take the appropriate action to enable a TFTP server.

4 Click OK to close the box. The EPM Rule Editor window remains.

NOTE

A notice regarding TFTP server availability is also displayed in the Status Panel under the Alerts tab. (Refer to

“Status Panel” on page 23.)

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 81 82

Sin comentarios

Extreme Networks Policy Manager Guía de usuario Pagina 17