Extreme Networks Altitude 4700 Series Guía de instalación Pagina 39

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 68
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 38
Altitude 4700 Series Access Point Installation Guide 39
NOTE
The AP4700 GE2 port will not be enabled unless a POE power source is used that supplies
802.3at power to the access point's GE1/POE port. Make sure an APPSBIAS1P3AFR model
Power Injector is used to ensure 30 WATTS of power is available to enable the WAN port. If a
legacy 802.3af power supply is utilized, the GE2 port will not be operational.
a Select the Enable WAN Interface checkbox to enable the WAN port. Disable this
option to effectively isolate the access point’s WAN connection. No connections
to a larger network or the Internet will be possible. MUs cannot communicate
beyond the configured subnets.
b Select the This Interface is a DHCP Client checkbox to enable DHCP for the access
point WAN connection. This is useful, if the connected network uses DHCP.
Vista de pagina 38
1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 67 68

Comentarios a estos manuales

Sin comentarios