Extreme Networks AltitudeTM 4522 Series Guía de instalación Pagina 14

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 68
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 13
Wall Mount Procedure
Altitude™ 4522 Series Access Point Installation Guide
14
1 Orient the case on the wall by its width or length.
CAUTION
To ensure proper operation of an Altitude 4522 Access Point, ensure that it is mounted in the
correct orientation as shown above.
2 Mark two points (for drill holes) 4.08 inches (103.7 mm) apart on a horizontal line.
3 At each point, drill a hole in the wall, insert an anchor, screw into the anchor the wall
mounting screw and stop when there is 1mm between the screw head and the wall.
NOTE
When pre-drilling a hole, the recommended hole size is 2.8mm (0.11in.).
Vista de pagina 13
1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 67 68

Comentarios a estos manuales

Sin comentarios