Extreme Networks PoS Guía de usuario Pagina 105
- Pagina / 178
- Tabla de contenidos
- SOLUCIÓN DE PROBLEMAS
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Packet Over SONET Module Installation and User Guide 3-57
Configuring QoS Functions
The DSCPs associated with a PHB are assigned to the appropriate QoS profile using the
config diffserv examination code-point command. For example, the following
command sets up the mapping for the EF PHB:
config diffserv examination code-point 46 qosprofile qp8 ports 2:1-2:2
Additional configuration steps for SONET ports in this example are as follows:
• Enable RED for all PHBs except the EF PHB. For example:
enable red ports 2:1-2:2
disable red ports 2:1-2:2 queue 8
• Configure a high drop-probability of 20% on the SONET ports. For example:
config red high-drop-probability 20 ports 2:1-2:2
• Enable examination of DiffServ information. For example:
enable diffserv examination ports 2:1-2:2
• Configure the default PHB. For example:
config diffserv examination code-point 0 qosprofile qp1 ports 2:1-2:2
• Configure the Class Selectors. For example:
config diffserv examination code-point 8 qosprofile qp2
ports 2:1-2:2 high-drop-probability
config diffserv examination code-point 16 qosprofile qp2
ports 2:1-2:2 high-drop-probability
config diffserv examination code-point 24 qosprofile qp2
ports 2:1-2:2 high-drop-probability
config diffserv examination code-point 32 qosprofile qp2
ports 2:1-2:2 low-drop-probability
config diffserv examination code-point 40 qosprofile qp2
ports 2:1-2:2 low-drop-probability
config diffserv examination code-point 48 qosprofile qp3
ports 2:1-2:2 high-drop-probability
config diffserv examination code-point 56 qosprofile qp3
ports 2:1-2:2 low-drop-probability
• Configure the drop-probability for the DSCPs assigned to AF1 through AF4.
For example, for AF1 (qp4):
c
onfig diffserv examination code-point 10 qosprofile qp4
ports 2:1-2:2 low-drop-probability
config diffserv examination code-point 12 qosprofile qp4
ports 2:1-2:2 high-drop-probability
- Packet Over SONET 1
- Module Installation and 1
- User Guide 1
- Contents 3
- 3 Configuring the PoS Module 4
- Contents v 5
- Related to the PoS Module 6
- Figures ix 9
- Ta bl es xi 11
- Introduction 13
- Conventions 14
- Related Publications 15
- Overview 17
- BlackDiamond I/O Modules 18
- About the PoS Modules 19
- Physical Description 20
- PoS Module LED Indicators 21
- Service Ports 21
- Feature Summary 23
- Function Summary 25
- Jumbo Frames 26
- Service Provider Features 27
- NetFlow Statistics 28
- Installing or Replacing a 31
- PoS Module 31
- Cables and Connectors 33
- Safety Information 34
- I/O Module Slot Locations 35
- 1234AB5678 36
- LED Indicators 40
- Troubleshooting 41
- Fixing Configuration Errors 43
- Fixing Power-Related Problems 45
- Fixing Link Down Problems 45
- Tools and Equipment 46
- Removing an I/O Module 47
- BlackDiamond 1 52
- BlackDiamond 2 52
- Routing Over PoS Ports 54
- APS Port Redundancy 56
- APS Module Redundancy 57
- APS Switch Redundancy 58
- Configuring SONET Framing 61
- Configuring SONET Clocking 62
- -error_rate 63
- Configuring the Signal Label 65
- SONET Events 67
- PPP Background Information 70
- VLAN xVLAN a 72
- IP Router 72
- Configuring the PoS Checksum 75
- Configuring PoS Scrambling 75
- Configuring Link Maintenance 76
- Displaying PPP Information 84
- Configuring a QoS Profile 92
- Configuring DiffServ 95
- DiffServ Classification 96
- Enhanced RED Support 99
- Configuring the PoS Module 100
- Configuring QoS Functions 101
- QoS Monitor 107
- Intra-Subnet QoS 107
- Export Criteria 112
- Unconfiguring Flow Statistics 120
- BlackDiamond 123
- Protection line 123
- Working line 123
- Virtual router 124
- Virtual APS router 127
- 192.168.10.1 192.168.10.2 127
- SONETPoS PoS 127
- Neighbor PPP router 127
- APS Benefits 130
- Table 3-16: APS Commands 134
- Enabling and Disabling APS 135
- Adding a Port to an APS Group 136
- Configuring APS Timers 139
- Configuring APS Lockout 140
- MIB Support for APS 144
- Configuring Port Tunneling 145
- Customer 146
- Configuring Port Attributes 150
- Jumbo Frame Support 152
- Configuring IGMP Attributes 153
- ExtremeWare Command 155
- New ExtremeWare Commands 156
- New Commands 157
- Changed Commands 159
- Supported MIBs and Standards 165
- SONET/SDH Support 166
- PPP Support 166
- QoS and DiffServ Support 167
- Flow Statistics Support 168
- Standards Supported for APS 169
- MIBs Supported for APS 169
- Numerics 171
- Index of Commands 177
Relacionado con productos y manuales para Redes Extreme Networks PoS
Redes Extreme Networks WM-4T1i Guía de usuario
(46 paginas)
(46 paginas)
Redes Extreme Networks WM-4T1i Guía de usuario
(38 paginas)
(38 paginas)
Redes Extreme Networks Altitude 3550 Especificaciones
(308 paginas)
(308 paginas)
Redes Extreme Networks WM200 Especificaciones
(210 paginas)
(210 paginas)
Redes Extreme Networks WM200 Especificaciones
(126 paginas)
(126 paginas)
Redes Extreme Networks WM-4T1i Especificaciones
(336 paginas)
(336 paginas)
Redes Extreme Networks AG200 Manual de usuario
(2 paginas)
(2 paginas)
Redes Extreme Networks WM200 Especificaciones
(130 paginas)
(130 paginas)
Redes Extreme Networks 300-2 Guía de instalación
(48 paginas)
(48 paginas)
Redes Extreme Networks WM2000 Manual de usuario
(3 paginas)
(3 paginas)
Redes Extreme Networks 300-2 Especificaciones
(62 paginas)
(62 paginas)
Redes Extreme Networks WM2000 Guía de usuario
(2 paginas)
(2 paginas)
Redes Extreme Networks WM-4T1i Especificaciones
(306 paginas)
(306 paginas)
© 2020, manymanuals.es. Todos los derechos reservados | 0.021 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales