Extreme Networks Summit WM Series Manual de usuario descargar pdf (Pagina 9)

PN: 72-9958-00-A.doc Page 9

Setting up SSID, Security and QOS

1. Go to the WM-AD Configuration menu and select the Topology tab.

2. Assign a subnet for clients for a specific SSID.

3. Under DHCP Settings, enter the appropriate address for the Gateway. For Mask enter

255.255.255.0. The address range should default to 192.168.121.2 – 192.168.121.254.

Change this if you want a limited range of addresses assigned to this subnet. No

DNS Servers or WINS is required.

4. Set the Timeout Idle pre and post to 2.

5. Under Next Hop Routing, set the OSPF Route Cost to 50000.

6. Enter an SSID name.

7. Check b/g for all Altitude™ APs

8. Save the settings using the Save button.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 17 18

Sin comentarios

Extreme Networks Summit WM Series Manual de usuario Pagina 9