Extreme Networks Altitude 3500 Series Especificaciones Pagina 101
- Pagina / 590
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Altitude 3500 Series Access Point Product Reference Guide
101
LLDP transmits periodic advertisements containing device information and media-specific configuration
information to neighbors attached to the same network. LLDP agents cannot solicit information from
other agents by using LLDP.
To configure LLDP support:
1 Select System Configuration > LLDP from the menu tree.
2 Select the Enable LLDP radio button to enable or disable the transmission of LLDP advertisements.
LLDP is enabled by default.
3 Set a Refresh Interval (in seconds 5-32768) to define the LLDP refresh-interval/transmit interval. The
Refresh Interval is the interval LLDP frames are transmitted on behalf of the LLDP agent. The default
is 30 seconds.
4 Set a Hold time Multiplier (2-10) to define the hold time multiplier. This parameter is a multiplier on
the Refresh Interval that determines the actual TTL value used in an LLDPDU. The default setting is
4.
5 Click Apply to save any changes to the LLDP screen. Navigating away from the screen without
clicking the Apply button results in all changes to the screen being lost.
6 Click Undo Changes (if necessary) to undo any changes made. Undo Changes reverts the settings
displayed on LLDP screen to the last saved configuration.
- Altitude 1
- Table of Contents 3
- About This Guide 11
- ● action items 12
- ● lists of alternatives 12
- ● Bullets (•) indicate: 12
- Introduction 13
- IP Filtering 14
- WIPS Support 14
- Trusted Host Management 15
- Adaptive AP 15
- QBSS Support 16
- LLDP Support 16
- Feature Overview 17
- Separate LAN and WAN Ports 18
- Multiple Mounting Options 18
- Sixteen Configurable WLANs 18
- Kerberos Authentication 20
- EAP Authentication 20
- WEP Encryption 21
- KeyGuard Encryption 21
- Firewall Security 22
- VPN Tunnels 22
- VLAN Support 23
- Updatable Firmware 23
- Power-over-Ethernet Support 24
- MU-MU Transmission Disallow 24
- Voice Prioritization 24
- Support for CAM and PSP MUs 25
- Statistical Displays 25
- Transmit Power Control 25
- DHCP Support 26
- Multi-Function LEDs 26
- Mesh Networking 27
- Additional LAN Subnet 27
- Hotspot Support 28
- Manual Date and Time Settings 28
- Theory of Operations 29
- Wireless Coverage 30
- MAC Layer Bridging 30
- Media Types 31
- MU Association Process 31
- Operating Modes 32
- Management Access Options 33
- Hardware Installation 35
- Altitude 3510 Configurations 36
- Altitude 3550 Configurations 36
- Requirements 37
- Access Point Placement 37
- Site Surveys 38
- Antenna Options 38
- Power Options 39
- Power Tap Systems 40
- Mounting an Altitude 3510 41
- Desk Mounted Installations 42
- Wall Mounted Installations 43
- ● Safety wire (recommended) 44
- ● Security cable (optional) 44
- ● Light pipe 46
- ● Badge for light pipe 46
- Light Pipe 47
- Ceiling Tile 47
- Altitude 3510 LED Indicators 48
- Mounting an Altitude 3550 49
- Fit the edges of the 50
- V-shaped part into the slots 50
- Tighten the 50
- Data over Ethernet 54
- 802.11a radio activity 54
- 802.11b/g radio activity 54
- Getting Started 55
- Configuration Options 56
- Basic Device Configuration 57
- Configuring Device Settings 59
- Testing Connectivity 64
- Where to Go from Here? 65
- Configuring System Settings 68
- Adaptive AP Setup 70
- Configuring Data Access 72
- Defining Trusted Hosts 76
- Importing a CA Certificate 78
- Apache Certificate Management 84
- HTTP server 85
- Configuring SNMP Settings 86
- Enabling SNMP Traps 92
- Configuring LLDP Settings 100
- Logging Configuration 102
- Updating Device Firmware 107
- System Configuration 112
- Network Management 113
- Configuring VLAN Support 116
- Configuring WAN Settings 125
- WAN port 128
- Configuring Port Forwarding 130
- Configuring Dynamic DNS 132
- Configuring Router Settings 163
- Setting the RIP Configuration 165
- Configuring IP Filtering 166
- Configuring Access Point 169
- Security 169
- Setting Passwords 170
- Configuring WEP Encryption 179
- ● 1011121314151617 185
- ● 18191A1B1C1D1E1F 185
- ● 2021222324252627 185
- ● 28292A2B2C2D2E2F 185
- Configuring Firewall Settings 188
- Configuring LAN to WAN Access 189
- Available Protocols 192
- Configuring VPN Tunnels 194
- Configuring Auto Key Settings 200
- Configuring IKE Key Settings 202
- Viewing VPN Status 205
- To view VPN status: 206
- Displaying Rogue AP Details 214
- Configuring the Radius Server 217
- Mapping Users to Groups 225
- Monitoring Statistics 231
- Viewing LAN Statistics 234
- Viewing Wireless Statistics 239
- Viewing WLAN Statistics 240
- Altitude 35xx menu tree 242
- Viewing Radio Statistics 245
- Retry Histogram 247
- Viewing MU Statistics Summary 248
- Viewing MU Details 250
- Pinging Individual MUs 252
- MU Authentication Statistics 253
- CLI Reference 259
- AP35xx>admin> 260
- AP35xx>admin>help 261
- AP35xx>admin>passwd 262
- AP35xx>admin>summary 263
- AP35xx>admin> / 265
- AP35xx>admin>save 266
- AP35xx>admin>quit 267
- AP35xx>admin(network)> 268
- Interface” on page 113 269
- Example 270
- Related Commands: 271
- Network LAN, Bridge Commands 272
- Support” on page 116 276
- Network LAN, DHCP Commands 283
- Network Type Filter Commands 289
- Configuration” on page 123 290
- Network WAN Commands 294
- Network WAN NAT Commands 297
- Deletes NAT entries 301
- Network WAN, VPN Commands 303
- Sets VPN entry parameters 305
- Lists VPN tunnel entries 308
- Network WAN Content commands 312
- Dynamic DNS” on page 132 316
- Network Wireless Commands 320
- Network WLAN Commands 321
- (WLANs)” on page 133 322
- Deletes an existing WLAN 326
- WLANs” on page 135 326
- Network Security Commands 334
- <idx> 339
- Network ACL Commands 346
- Removes an MU ACL policy 350
- Removes a QoS policy 373
- Network Rogue-AP Commands 377
- WIPS Commands 387
- Network Firewall Commands 393
- Network Router Commands 398
- AP35xx>admin(system)> 404
- Settings” on page 68 407
- Adaptive AP Setup Commands 410
- System Access Commands 414
- Data Access” on page 72 415
- Certificate” on page 78 422
- Deletes a private key 426
- System SNMP Commands 430
- Access Control” on page 90 432
- <access> 432
- Lists SNMP access entries 434
- System SNMP Traps Commands 435
- Sets SNMP trap parameters 437
- Traps” on page 94 437
- System User Database Commands 441
- System RADIUS Commands 454
- Goes to the EAP submenu 456
- Authentication” on page 217 456
- Goes to the Peap submenu 457
- Goes to the TTLS submenu 459
- Goes to the LDAP submenu 465
- Authentication” on page 220 465
- Radius Server” on page 217 473
- (NTP)” on page 98 477
- System Log Commands 482
- Firmware Update Commands 495
- Firmware” on page 107 496
- AP35xx>admin(stats) 499
- Initiates the echo test 509
- Initiates the ping test 514
- Configuring Mesh Networking 515
- Spanning Tree Protocol (STP) 517
- Defining the Mesh Topology 517
- Normal Operation 518
- Configuring AP#1: 531
- Configuring AP#2 536
- Configuring AP#3 537
- Repeater and a Client Bridge 541
- Where to Go From Here 548
- Adaptive AP Management 548
- Types of Adaptive APs 549
- Licensing 549
- Controller Discovery 549
- Manual Adoption Configuration 550
- Adaptive AP WLAN Topology 551
- Configuration Updates 551
- Adaptive Mesh Support 552
- Extended WLANs Only 554
- Independent WLANs Only 554
- Adaptive AP Prerequisites 555
- Adaptive AP Configuration 556
- Controller Configuration 558
- Technical Specifications 567
- Electrical Characteristics 568
- Radio Characteristics 569
- Antenna Specifications 569
- Country Codes 570
- Usage Scenarios 573
- ● 1 TFTP Server 575
- DHCP Priorities 577
- BootP Options 577
- ● Sends a true BootP request 578
- BootP Priorities 579
- ● 1 Cisco VPN device 583
- Customer Support 589
Relacionado con productos y manuales para Puntos de acceso wlan Extreme Networks Altitude 3500 Series
(63 paginas)© 2020, manymanuals.es. Todos los derechos reservados | 0.040 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales