Extreme Networks e" series Guía de instalación Pagina 82

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 112
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 81
82 Consolidated "e" Series Hardware Installation Guide
Summit 300 Optional Features
Installing and Removing Power Cable Retaining Brackets
The power cable for the Summit 300-48 power supply can be attached to the supply using power cable
retaining brackets. The retaining brackets make it less likely that a power supply cable will be
inadvertently knocked loose from a power supply.
Installing the Power Cable Retaining Bracket
To install a power cable retaining bracket:
1 Turn off the power supply by setting the power switch to the OFF position.
2 Disconnect the power cable from the power source and then disconnect the Summit 300-48.
3 Slide the retaining bracket over the power cable, as shown in Figure 26.
If necessary, loosen the retaining bracket screw.
Figure 26: Attaching the retaining bracket
LB48021B
Retaining bracket screw
Vista de pagina 81
1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 111 112

Comentarios a estos manuales

Sin comentarios