
Extreme Networks Consolidated Hardware Guide 17-3
Removing a BlackDiamond 6800 Series Fan Tray
For the BlackDiamond 6808 switch, use a #1 Phillips screwdriver to unscrew the ten
screws that secure the fan tray to the rear of the chassis. Put the screws aside in a
safe place.
3 For the BlackDiamond 6816 switch, use the handle on the front of the fan tray to pull
it straight out of the chassis approximately ½ inch (12.7 mm), as shown in
Figure 17-1. This action disconnects the power to the fan tray.
For the BlackDiamond 6808 switch, grasp the edges of the fan tray and pull it out of
the chassis approximately ½ inch (12.7 mm), as shown in Figure 17-2. This action
disconnects power to the fan tray.
Figure 17-1: Removing the BlackDiamond 6816 fan tray
BD_030
Comentarios a estos manuales