Extreme Networks IP Service Manager Manual de usuario descargar pdf (Pagina 20)

Deployment Guide – ExtremeXOS, NetSight, NAC on BlackDiamond X8, BlackDiamond 8K, Summit Switches

Basic Administration

This section is only starting point and represents a tiny subset of the functionality and options

within EXOS. Please refer to ExtremeXOS documentation on the Extreme documentation page

for full descriptions.

SNMP

First, configure SNMP identification information. The following is an example:

configure snmp sysName "x770_ToR_1"

configure snmp sysLocation "DC Raleigh"

configure snmp sysContact "Jane Maxwell"

Configure the SNMP community strings and ensure they are consistent with the SNMP settings

configured in Extreme NetSight to enable the Extreme switches to authenticate properly. The

following is a sample SNMPv2 configuration:

config snmp delete community all

config snmp add community readwrite RW

config snmp add community readonly RO

config snmp add trapreceiver 192.168.1.1 community RW from 192.168.61.2 vr VR-Mgmt

The following is a sample SNMPv3 configuration:

configure snmpv3 add user snmpuser authentication md5 snmpauthcred privacy snmpprivcred

configure snmpv3 add group admin user snmpuser sec-model usm

To view SNMP settings, use the command:

show switch

show management

show snmpv3 community

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 34 35

Sin comentarios

Extreme Networks IP Service Manager Manual de usuario Pagina 20