Extreme Networks ExtremeWare XOS Command Especificaciones descargar pdf (Pagina 169)

100

101

disable slot

ExtremeWare XOS 10.1 Command Reference Guide 169

disable slot

disable slot [<slot number> | all]

Description

Disables one or all slots on a BlackDiamond switch, and leaves the blade in a power down state.

Syntax Description

Default

Enabled.

Usage Guidelines

This command allows the user to disable a slot. When the user types this command, the I/O card in

that particular slot number is brought down, and the slot is powered down. The LEDs on the card go

OFF.

A disabled slot can be re-enabled using the enable slot command.

The show slot command, if invoked after the user disables the slot, shows this slot state as “Power

Off/Disabled.” The user can either disable a slot individually or use the d

isable slot all to disable

all the slots.

If there is no I/O card present in a slot when the user disables the slot, the slot still goes to the

“Disable” state. If a card is inserted in a slot that has been disabled, the card does not come up and

stays in the “Power Off/Disabled” state until the slot is enabled by using the

enable slot command.

below.

If you do not save the configuration before you do a switch reboot, the slot will be re-enabled upon

reboot. If you save the configuration after disabling a slot, the slot will remain disabled after a reboot.

Example

The following command disables slot 5 on the switch:

disable slot 5

slot number Specifies the slot to be disabled.

all Species that all slots in the device should be disabled.

1 2 ... 164 165 166 167 168 169 170 171 172 173 174 ... 757 758

Extreme Networks ExtremeWare XOS Command Especificaciones Pagina 169

Comentarios a estos manuales