Extreme Networks ExtremeWare XOS Command Especificaciones descargar pdf (Pagina 398)

100

101

398 ExtremeWare XOS 10.1 Command Reference Guide

STP Commands

enable stpd ports

enable stpd <stpd_name> ports [all | <port_list>]

Description

Enables the STP protocol on one or more ports.

Syntax Description

Default

Enabled.

Usage Guidelines

After you have created the STPD with a unique name, the keyword stpd is optional.

If STPD is enabled for a port, Bridge Protocol Data Units (BPDUs) will be generated and processed on

that port if STP is enabled for the associated STPD.

You must configure one or more STP domains before you can use the enable stpd ports command.

Use the

create stpd command to create an STP domain. If you have considerable knowledge and

experience with STP, you can configure the STPD using the

configure stpd commands. However, the

default STP parameters are adequate for most networks.

On a modular switch, <port_list> can be a list of slots and ports. For a detailed explanation of port

specification, see “Modular Switch Numerical Ranges” in Chapter 1.

Example

The following command enables slot 2, port 4 on an STPD named Backbone_st:

enable stpd backbone_st ports 2:4

stpd_name Specifies an STPD on the switch.

all Specifies all ports for a given STPD.

port_list Specifies one or more slots and ports. May be in the form 2:*, 2:5, 2:6-2:8.

1 2 ... 393 394 395 396 397 398 399 400 401 402 403 ... 757 758

Comentarios a estos manuales

Sin comentarios

Extreme Networks ExtremeWare XOS Command Especificaciones Pagina 398

Comentarios a estos manuales