Extreme Networks ExtremeWare XOS Command Especificaciones descargar pdf (Pagina 704)

100

101

704 ExtremeWare XOS 10.1 Command Reference Guide

IP Multicast Commands

configure pim spt-threshold

configure pim spt-threshold <leaf-threshold> {<rp_threshold>}

Description

Configures the threshold, in kbps, for switching to SPT. On leaf routers, this setting is based on data

packets. On the RP, this setting is based on register packets.

Syntax Description

Default

The default setting is 0.

Usage Guidelines

For the best performance leveraged by hardware forwarding, use default value “0,0”, or small values

below 16. From release 6.2.2 onwards, since the RP learns the source address from the register message,

the RP threshold has no effect.

Example

The following command sets the threshold for switching to SPT:

configure pim spt-threshold 4 16

leaf-threshold Specifies the rate of traffic in kbps for the last hop.

rp_threshold Specifies an RP threshold.

1 2 ... 699 700 701 702 703 704 705 706 707 708 709 ... 757 758

Comentarios a estos manuales

Sin comentarios

Extreme Networks ExtremeWare XOS Command Especificaciones Pagina 704

Comentarios a estos manuales