
Ongoing operation
Summit WM-Series WLAN Switch and Altitude Access Point Software Version 1.0 User Guide
136
1 Click on the Summit WM-Series Switch tab. Click on the System Maintenance option. The System
Maintenance screen appears.
Health Checking
1 In the Poll Interval field, key in a time in seconds for the Summit WM-Series Switch to check that
the Altitude APs are still there. Click on the Apply button.
Force a system shutdown on the Summit WM-Series Switch
1 To shut down the Summit WM-Series Switch Software system, with its Altitude APs, click on the
appropriate radio button:
● Halt system, reboot
● Halt system, reset database to factory default and reboot
● Halt system, reset to factory default and reboot
● Halt system, shutdown power
2 Click on the Apply Now button.
Change the system log level
1 From the Log Level drop-down list, select the desired log level (Trace, Info, Minor, Major, Critical).
Click on the Apply button.
Enable and configure Syslog
1 Click the checkbox on to enable the Syslog function for up to three syslog servers.
2 For each enabled syslog server, key in a valid IP address for the server on the network. The default
port for syslog is 514.
3 In the Facilities area, in the Application Logs drop-down list, select the log level (“local.0” to
“local.6”) to be sent to the syslog server. (This will apply to all three servers.)
Comentarios a estos manuales