Extreme Networks Summit WM Series Guía de usuario descargar pdf (Pagina 92)

WM Access Domain Configuration

Summit WM-Series WLAN Switch and Altitude Access Point Software Version 1.0 User Guide

Filtering Rules by Filter ID: Examples

Below are two examples of possible filtering rules for a Filter ID. The first disallows only some specific

access before allowing everything else.

The second example does the opposite of the first example. It allows only some specific access and

denies everything else.

Filtering rules for a default filter

After authentication of the wireless device user, the default filter will apply only after:

● no match is found for the Exception flittering rules

● no Filter ID attribute value is returned by the authentication server for this user

● no match is found on the Summit WM-Series Switch for a Filter ID value

The final rule in the Default filter should be a catch-all for any traffic that did not match a filter. A final

“allow all” rule in a Default Filter will ensure that a packet is not dropped entirely if no other match

can be found.

In Out Allow IP / Port Description

x x *.*.*.*:22-23 Deny all telnet sessions

x x [specific IP address, range] Deny all traffic to a specific IP address or address

range

x x x *.*.*.*. Allow everything else

In Out Allow IP / Port Description

x x x [specific IP address, range] Allow traffic to a specific IP address or address range.

x x *.*.*.*. Deny everything else.

1 2 ... 87 88 89 90 91 92 93 94 95 96 97 ... 227 228

Sin comentarios

Extreme Networks Summit WM Series Guía de usuario Pagina 92