Extreme Networks BlackDiamond 10808 Guía de instalación Pagina 49

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 88
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 48
Installing MSMs
Extreme Networks BlackDiamond 10K-Series Switch Installation Guide 49
9 Ensure that the MSM is vertical as shown in Figure14, with the:
Module name at the top
PCB to the right
Ejector/injector levers extended
Figure 14: MSM prior to insertion in a BlackDiamond 10808 switch
a Slide the MSM into the appropriate lettered slot of the chassis, until it makes contact with the
backplane.
NOTE
Use the metal panel, not the PCB, to guide the MSM.
As the MSM begins to seat in the chassis, the ejector/injector levers begin to close.
b To close the ejector/injector levers, use both hands simultaneously to push the handles toward
the center of the module.
c To secure the module, tighten the two screws with a #1 Phillips screwdriver.
NOTE
Tighten the screws of this module before you insert additional modules. Otherwise, you might unseat
modules that you have not secured.
EX_016
Module status LEDs
Module reset button
Console port
Management port
Compact flash
Vista de pagina 48
1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 87 88

Comentarios a estos manuales

Sin comentarios