Extreme Networks BlackDiamond 10808 Guía de instalación Pagina 73

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 88
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 72
Installing the Fan Tray
Extreme Networks BlackDiamond 10K-Series Switch Installation Guide 73
4 Allow the fan blades to stop spinning before you remove the fan tray from its slot.
WARNING!
Keep your hands away from rotating fan blades.
5 To support the fan tray, place one hand under the fan tray and use the other hand to pull the fan
tray from its slot.
6 Leave the ESD strap permanently connected to the chassis so that it is always available when you
need to handle ESD-sensitive components.
Installing the Fan Tray
The BlackDiamond 10808 switch fan trays are hot-swappable. You do not need to turn off power to an
BlackDiamond 10808 switch to install a fan tray.
You need the following tools and equipment to install a fan tray:
ESD-preventive wrist strap
# 1 Phillips screwdriver
Replacement fan tray
CAUTION
Only trained service personnel should perform service to BlackDiamond 10808 switch fan trays. Before
installing or removing any components, and before carrying out any maintenance procedures, see
Appendix A.
To install the fan tray in the BlackDiamond 10808 switch:
1 Attach the ESD strap that is provided to your wrist and connect the metal end to the ground
receptacle that is located on the top-right corner of the switch front panel.
2 Check the connectors for dust and packing materials.
3 To support the fan tray, place one hand under the fan tray and use the other hand to guide the fan
tray into the slot.
Gently begin to insert the new fan tray into the slot.
NOTE
If the chassis is powered on, the fan blades will begin turning as soon as the tray makes contact
with the backplane.
4 To secure the fan tray, turn the screws clockwise until they become tight.
5 Leave the ESD strap permanently connected to the chassis so that it is always available when you
need to handle ESD-sensitive components.
Vista de pagina 72
1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 87 88

Comentarios a estos manuales

Sin comentarios