Extreme Networks BlackDiamond 10808 Guía de instalación descargar pdf (Pagina 77)

Logging In for the First Time

Extreme Networks BlackDiamond 10K-Series Switch Installation Guide 77

Logging In for the First Time

After your switch has completed all POSTs, it is operational. When the switch is operational, you can

To manually configure the IP settings:

1 Connect a terminal or PC with terminal-emulation software to the MSM.

2 At your terminal, press [Return] one or more times until you see the login prompt.

3 At the login prompt, enter the default user name admin to log on with administrator privileges. For

example:

Administrator capabilities allow you to access all switch functions.

NOTE

For more information about logging in to the switch and configuring switch management access, see

the Extreme Networks XOS Concepts Guide.

4 At the password prompt, press [Return].

This is because the default user name, admin, has no password assigned to it. When you have

successfully logged on to the system, the command-line prompt displays the system name (for

example,

BlackDiamond10808> in its prompt.

NOTE

For more information about how to make a specific system name, see the ExtremeWare Software

User Guide.

5 Assign an IP address and subnetwork mask for VLAN default by typing:

config vlan default ipaddress 123.45.67.8 255.255.255.0

Your changes take effect immediately.

6 Save your configuration changes so that they will be in effect after the next system reboot by typing:

save

The configuration is saved to the configuration database of the SMMi modules in the BlackDiamond

10808 switch and both MSM160 modules in the BlackDiamond switch.

NOTE

For more information about saving configuration changes, see the Extreme Networks XOS Concepts

Guide.

7 When you are finished with these tasks, log out of the switch by typing:

logout

1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 87 88

Sin comentarios

Extreme Networks BlackDiamond 10808 Guía de instalación Pagina 77